dmesg - Pirma-bandyta GeForce-GT130
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-30-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27)
Command line: BOOT_IMAGE=/boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/Ubuntu-Baltix-12.04.1-desktop-amd64.iso quiet splash debian-installer/locale=lt --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: System manufacturer System Product Name/M2N-E, BIOS ASUS M2N-E ACPI BIOS Revision 1102 09/21/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00BFF00000 mask FFFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
found SMP MP-table at [ffff8800000f5980] f5980
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000bfee0000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfee0000 page 4k
kernel direct mapping tables up to bfee0000 @ 1fffb000-20000000
RAMDISK: 36306000 - 3717b000
ACPI: RSDP 00000000000f7720 00024 (v02 Nvidia)
ACPI: XSDT 00000000bfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000bfeeabc0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bfee3280 078E1 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfee0000 00040
ACPI: SSDT 00000000bfeeadc0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000bfeeb100 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bfeeb180 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000bfeead00 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-00000000bfee0000
Initmem setup node 0 0000000000000000-00000000bfee0000
NODE_DATA [00000000bfedb000 - 00000000bfedffff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bfee0
On node 0 totalpages: 786031
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 12220 pages used for memmap
DMA32 zone: 769828 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfefff000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s83136 r8192 d23360 u1048576
pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 773742
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/Ubuntu-Baltix-12.04.1-desktop-amd64.iso quiet splash debian-installer/locale=lt --
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3406000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 3064112k/3144576k available (6558k kernel code, 452k absent, 80012k reserved, 6642k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2812.895 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.79 BogoMIPS (lpj=11251580)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 27008 entries in 106 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (11251.64 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
print_constraints: dummy:
RTC time: 17:59:46, date: 05/22/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [9000, ffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f02fffff]
bus: [00, 02] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff] (ignored)
pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
pci 0000:00:01.0: [10de:0360] type 0 class 0x000601
pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:036a] type 0 class 0x000500
pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:05.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:05.0: reg 20: [io 0xdc00-0xdc0f]
pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:05.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:05.1: reg 20: [io 0xc800-0xc80f]
pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
pci 0000:00:05.2: reg 10: [io 0xc400-0xc407]
pci 0000:00:05.2: reg 14: [io 0xc000-0xc003]
pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07]
pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803]
pci 0000:00:05.2: reg 20: [io 0xb400-0xb40f]
pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
pci 0000:00:06.1: reg 10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:08.0: reg 14: [io 0xb000-0xb007]
pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:06.0: [13f6:0111] type 0 class 0x000401
pci 0000:01:06.0: reg 10: [io 0xac00-0xacff]
pci 0000:01:07.0: [109e:032e] type 0 class 0x000400
pci 0000:01:07.0: reg 10: [mem 0x00000000-0x00000fff pref]
pci 0000:01:07.1: [109e:0838] type 0 class 0x000480
pci 0000:01:07.1: reg 10: [mem 0x00000000-0x00000fff pref]
pci 0000:01:08.0: [1033:00f2] type 0 class 0x000c00
pci 0000:01:08.0: reg 10: [mem 0xfdeff000-0xfdefffff]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:08.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xc0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
pci 0000:02:00.0: [10de:0626] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0x9c00-0x9c7f]
pci 0000:02:00.0: reg 30: [mem 0xfbf80000-0xfbffffff pref]
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xbff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0290-0x0297]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfefff000-0xfefff3ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000ce000-0x000cffff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0xfefff000-0xfefff0ff]
pnp 00:0b: [mem 0xbfee0000-0xbfefffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xbfedffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
pnp 00:0b: [mem 0xfefff000-0xfeffffff]
pnp 00:0b: [mem 0xfff80000-0xfff80fff]
pnp 00:0b: [mem 0xfff90000-0xfffbffff]
pnp 00:0b: [mem 0xfffed000-0xfffeffff]
system 00:0b: [mem 0x000ce000-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved
system 00:0b: [mem 0xbfee0000-0xbfefffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xbfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved
system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
pci 0000:01:07.0: BAR 0: assigned [mem 0xc0000000-0xc0000fff pref]
pci 0000:01:07.0: BAR 0: set to [mem 0xc0000000-0xc0000fff pref] (PCI address [0xc0000000-0xc0000fff])
pci 0000:01:07.1: BAR 0: assigned [mem 0xc0001000-0xc0001fff pref]
pci 0000:01:07.1: BAR 0: set to [mem 0xc0001000-0xc0001fff pref] (PCI address [0xc0001000-0xc0001fff])
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [mem 0xc0000000-0xc00fffff pref]
pci 0000:00:0f.0: PCI bridge to [bus 02-02]
pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0xc0000000-0xf3ffffff]
pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 6 [mem 0xc0000000-0xf3ffffff]
pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1369245587.316:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 5984
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0f.0: setting latency timer to 64
pcieport 0000:00:0f.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 14804k freed
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:05.0: setting latency timer to 64
pata_acpi 0000:00:05.0: PCI INT A disabled
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:05.1: setting latency timer to 64
pata_acpi 0000:00:05.1: PCI INT B disabled
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
pata_acpi 0000:00:05.2: setting latency timer to 64
pata_acpi 0000:00:05.2: PCI INT C disabled
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:891:997
rtc_cmos 00:05: setting system clock to 2013-05-22 17:59:49 UTC (1369245589)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0x14 (2800 MHz), vid 0xa
powernow-k8: fid 0x12 (2600 MHz), vid 0xc
powernow-k8: fid 0x10 (2400 MHz), vid 0xe
powernow-k8: fid 0xe (2200 MHz), vid 0x10
powernow-k8: fid 0xc (2000 MHz), vid 0x10
powernow-k8: fid 0xa (1800 MHz), vid 0x10
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1616k freed
Freeing unused kernel memory: 1200k freed
udevd[125]: starting version 175
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:08.0: setting latency timer to 64
ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.05, max UDMA/66
ata1.01: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS04, max UDMA/33
ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f)
ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f)
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.05 PQ: 0 ANSI: 5
usb 1-7: new high-speed USB device number 4 using ehci_hcd
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: CD-ROM TSSTcorp CDW/DVD SH-M522C TS04 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
sr 0:0:1:0: Attached scsi generic sg1 type 5
ata2: port disabled--ignoring
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
firewire_ohci 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
nouveau 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x094300a1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.20.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02022332 00020010
[drm] nouveau 0000:02:00.0: Raw DCB entry 4: 0000000e 00000000
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:02:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD21E
firewire_ohci: Added fw-ohci device 0000:01:08.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD633
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE624
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE76D
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE9A9
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEA0E
[drm] nouveau 0000:02:00.0: 0xEA0E: Condition still not met after 20ms, skipping following opcodes
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-7:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: core 500MHz shader 1250MHz memory 500MHz voltage 1100mV fanspeed 100%
[drm] nouveau 0000:02:00.0: c: core 500MHz shader 1250MHz memory 499MHz voltage 1100mV
[TTM] Zone kernel: Available graphics memory: 1541326 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 768MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:02:00.0: allocated 1680x1050 fb: 0x310000, bo ffff8800b4f54800
fbcon: nouveaufb (fb0) is primary device
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:d8:81:35
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
sata_nv 0000:00:05.0: version 3.5
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi5 : sata_nv
scsi6 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi7 : sata_nv
scsi8 : sata_nv
ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
usb 2-2: new low-speed USB device number 2 using ohci_hcd
firewire_core: created device fw0: GUID 00004c0100000036, S400
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3400620NS, 3.AEG, max UDMA/133
ata3.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-4: new low-speed USB device number 3 using ohci_hcd
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 3:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:1: Attached scsi generic sg4 type 0
sd 2:0:0:2: Attached scsi generic sg5 type 0
sd 2:0:0:3: Attached scsi generic sg6 type 0
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:2: [sdd] Attached SCSI removable disk
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:3: [sde] Attached SCSI removable disk
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-2/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:02.0-4/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input4
generic-usb 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:02.0-4/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF0, max UDMA/133
ata4.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
sd 4:0:0:0: [sdf] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 4:0:0:0: Attached scsi generic sg7 type 0
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 4:0:0:0: [sdf] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Btrfs loaded
xor: automatically using best checksumming function: generic_sse
generic_sse: 8784.000 MB/sec
xor: using function: generic_sse (8784.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[1513]: starting version 175
Adding 506012k swap on /dev/sda5. Priority:-1 extents:1 across:506012k
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
i2c i2c-4: nForce2 SMBus adapter at 0x1c00
ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [io 0x1c40-0x1c45]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
lp0: using parport0 (interrupt-driven).
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.3.0 loaded
init: failsafe main process (1814) killed by TERM signal
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
snd_cmipci 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
snd_hda_intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: msi for device 1043:81f6 set to 0
snd_hda_intel 0000:00:06.1: setting latency timer to 64
forcedeth 0000:00:08.0: irq 41 for MSI/MSI-X
eth0: no IPv6 routers present
usb 2-3: new full-speed USB device number 4 using ohci_hcd
input: Wacom Intuos5 touch L Pen as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input5
input: Wacom Intuos5 touch L Finger as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input6
usbcore: registered new interface driver wacom
wacom: v1.53:USB Wacom tablet driver
usb 2-3: USB disconnect, device number 4
wacom: wacom_sys_irq - usb_submit_urb failed with result -19